Easy Installation

Making VILLA DECO-DIY CROWN MOLDING a part of your home requires only a few simple, low-cost materials and a few simple steps.

Enjoy the professional look and finished style of VILLA DECO-DIY CROWN MOLDING. You can make a big change with a few hours of spare time! Take a look at our before and after photos.

Step 1: Tools You Will Need

• Miter Box and Saw
• Caulking
• Tape Measure
• Ladder

Step 2: Paint –No Primer Required

Apply the latex (water based)house paint of your choice.

Step 3: Cut Edges to Fit the Room

Use a miter box and simple hand saw. Power tools may also be used if available.

Step 4: Add a bead of caulk to the molding to ensure secure placement. Do not over do it – the caulk is strong and needs only a single bead for full adhesion.

Step 5: Remove Excess Caulk

Simply wipe away excess caulk with a damp cloth.

That's it, It's So Simple.

Measuring for VILLA DECO DIY - CROWN MOLDING

Begin by sketching your room on a piece of paper. Next measure all the walls and write in the measurements on your sketch and add up all the measurements. Add 10% to your estimate for cuts and waste.

Put a Circle all inside corners and a square on all outside corners. Add up all the inside corners and all the outside corners.

Now you are ready to visit our Buy Online page and select the crown molding that you prefer. Our crown molding comes in boxes with 68 linear feet in them. Divide the number of feet from your measurements to calculate the number of boxes you will need. Once you add your crown molding to the cart you can select up to 5 free pre-cut corners.

Enjoy the professional look and finished style of VILLA DECO-DIY CROWN MOLDING. Make a big change with a few hours of spare time!